We offer basic to high end type of data logger. We offer integrated facility of SD card, PC interface, mobile interface etc. and we are having options of temperature data logger, PH data logger, Soil Moisture data logger and Energy Data Logger etc
DSO (60/100 MHZ)
(Model:- ATM MI 005)
- Signal Bandwidth: 60/100 MHz 7.0″ TFT LCD Color display.
- 32 kbps memory depth Independent vertical scale & position control knobs for each channel.
- Edge, Pulse Width, Video, Slope, trigger mode.
- Math functions including Add, Subtract, Multiply, Divide & 1024 point FFT 32 parameters of automatic measurements Unique Digital Filter & waveform recorder function.
- Advanced cursor modes: Manual, Auto & Track Waveform Intensity & Grid Brightness can be adjusted PASS/ FAIL detection, PASS/FAIL output Built-in 60/100 MHz hardware frequency counter Save/recall types: Waveforms, CSV le, Picture Standard Interface USB Host: Support US ash driver save/ recall function & firmware.
(Model:- ATM MI 007)
- Count: 6000 , AVG Voltage: DC: 600 volts; AC: 60 volts; DC Accuracy: ± 0.5% + 3 digit; AC Accuracy: ± 1% + 3 digit .
- Resistance: 40 M ohm; Resistance Accuracy: ± 1.5% + 3 digit.
- Capacitance: 100 μF, CAT III 600 volts safety rated.
- AC/DC voltage, resistance, capacitance, frequency measurement.
- Diode and continuity test with buzzer.
- Small lightweight design – easy to carry in a pocket.
- Long battery life with auto power Off.
(Model:- ATM MI 008)
- 30-0-30 V, 2 Amps DC Output: 2, 0 – 30 V, 2 A continuously variable by means of coarse and fine controls.
- Current limit : 100 mA – 2 A continuously adjustable Resolution : Voltage : 100 mV Current : 10 mA Internal Resistance, Ripple & Noise Display : 3 digit for voltage & 3 digit for current LED indication for Voltage & Current.
Portable Data Logger
Portable Data Logger feature latest technology support and helps in logging physical parameter of multiple locations and save it into SD card. It can handle inputs of up to 8 channel(4 channel for analog/Digital sensors each) made available to log data from interval of 600 sample/sec to 1 sample/week. This data logger come with menu based options which can be used to select which channel and which sample rate is used for logging.
Data Acquisition System
Power supply voltage :5Vdc to 24V dc (Operable using 12V battery)
Measurement range : 0% – 50% VWC
Accuracy: ±3.0% VWC
Precision: 0.05% VWC
Conductivity range 0 – 8 DS/m
Operating temperature :-10 degree C to 50 degree C
Installation :Installation without civil work at the site
Single Channel Data Logger
- Battery operated system for live status monitoring and control
- Single channel temperature sensor with control / calibration facility
- Optional:- facility for LCD DISPLAY / keypad interface
- Extra relays for controlling digital outputs
- The data can be send to cloud & software Monitoring System
- Battery operated (backup upto 4 hour ).
- Data Retrieve through USB cable / memory card.
- Main Power failure message facility
- Setting of data logger through SMS command.
- Automatic alert on 3 mobile numbers.
- LED Indicator- Power & Battery Indication.
Energy Data Logger
Energy data loggers can be used to collect accurate, actionable power consumption and energy performance data for analysis of energy use patterns and building performance optimization. You can use these tools to track the efficiency of building systems, manage peak energy demand, sub metering, and more. Energy data loggers feature latest technology support and helps in logging power consumption .
Temperature Data Logger
Temperature Data Logger feature latest technology support and helps in logging physical parameter of multiple locations and save it into SD card. It can handle inputs of up to 8 channel(4 channel for analog/Digital sensors each) made available to log data from interval of 600 sample/sec to 1 sample/week. This data logger come with menu based options which can be used to select which channel and which sample rate is used for logging.
Flame Proof Data Logging System
- Display: 5.5 inch TFT display.
- Number of channels: 11.
1. PT 100 type 08 .
2.J type thermocouple 03.
- Temperature Range: 0°C to 200°C .
- Resolution: 0.1°C.
- Accuracy: ±0.5% or less.
- Sampling Frequency: Minimum 1Hz.
- Internal Memory: 8GB or more & Store data in excel format.
- Computer software for plotting graphs.
- Flame proof enclosure.
RFID Based Finished Goods Teller
- Finished goods teller system include basic over/under weighing
- Separate RFID tag for individual product
- High/ Low alert on variation in standard weight
- Capacity:-2000kg, Readability:-100gm.
- Repeatability:- 100gm
- Indicator mounting:- Wall Mounting
- Indicator MOC & Protection:- Ms & ip679
- Interfaces:- Rs232
Pass Box Interlock System
- Easy and quick installation, Available in soft touch key touch key board.
- Advanced design as per clean room concept, powerful electromagnet
- Normally both doors remain closed to open any door press green push button of keyboard is available
- Optional:- Relay output for UVlamp.